Chapter 4 Connectivity Management
4.4 LUN Group Management
6
Repeat
the volumes.
If an error screen appears under the following conditions, check the parameter settings.
•
The "Name" is not entered
•
The "Name" does not satisfy the input conditions
•
The "Name" matches with an existing LUN group name
•
A host cannot recognize some LUNs
7
Check the LUN and the volume allocation information to be registered in the LUN group,
click the [Modify] button.
A confirmation screen appears.
8
Click the [OK] button.
Modifying LUN group starts.
9
Click the [Done] button to return to the [LUN Group] screen.
Step 3
through
Step 5
to set multiple allocation information between the LUNs and
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
470
End of procedure
P2X0-1270-13ENZ0