Chapter 7 Advanced Copy Management
7.8 REC Management
The main setting items are as follows.
●
Copy Path Setting
•
Line Setting
●
Line Setting
•
Connection Type
•
Link Speed
3
Click the [OK] button.
The [Copy Path Creation Storage System Selection] screen appears.
4
Repeat
to set copy paths.
If an error screen appears under the following conditions, check the parameter settings.
•
The number of remote storage systems exceeds the maximum
•
The number of paths per port exceeds the maximum
5
When setting a copy path is completed for all the storage systems, click the [Next >>]
button.
The [Storage System Connection List] screen appears. Proceed to
(page
Step 1
through
Step 3
the same number of times as the number of storage systems
627).
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
623
"Apply Copy Path Information"
P2X0-1270-13ENZ0