Appendix A Parameter List
A.1 System Management
•
Primary NTP Server (Domain Name / IP Address)
Description
Input condition/
Display contents
•
Primary NTP Server (LAN Port used for NTP)
Description
Input condition/
Display contents
•
Secondary NTP Server (Domain Name / IP Address)
Description
Input condition/
Display contents
•
Secondary NTP Server (LAN Port used for NTP)
Description
Input condition/
Display contents
Input the domain name or the IP address of the primary NTP server.
There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6
addresses can be used; "link local address", "global address", "unique local address", or
"6to4 address". Refer to
"Available IPv6 Address" (page 107)
This item is only available when "Yes" is selected for "Synchronize with NTP Server".
•
For domain name
Up to 63 alphanumeric characters and symbols
•
For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
•
For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to
"IPv6 Address Notation" (page 378)
Select which port is used to connect to the primary NTP server.
This item is only available when "Yes" is selected for "Synchronize with NTP Server".
•
MNT
•
RMT
Input the domain name or the IP address of the secondary NTP server.
There are two methods to specify an IP address; "IPv4" and "IPv6". The following IPv6
addresses can be used; "link local address", "global address", "unique local address", or
"6to4 address". Refer to
"Available IPv6 Address" (page 107)
This item is only available when "Yes" is selected for "Synchronize with NTP Server".
•
For domain name
Up to 63 alphanumeric characters and symbols
•
For IPv4 address
xxx.xxx.xxx.xxx
xxx: 1 - 255 for the top field (decimal)
xxx: 0 - 255 for other fields (decimal)
•
For IPv6 address
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (FFFF) (hexadecimal, alphanumeric characters)
Refer to
"IPv6 Address Notation" (page 378)
Select which port is used to connect to the secondary NTP server.
This item is only available when "Yes" is selected for "Synchronize with NTP Server".
•
MNT
•
RMT
670
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
for details.
for details.
for details.
for details.
P2X0-1270-13ENZ0