Chapter 7 Advanced Copy Management
7.8 REC Management
2
Click the [Measure] button.
Measurement of round trip time starts.
3
Change the "Round Trip Time (msec)" value if necessary.
The main setting item is as follows.
●
Measure Round Trip Time
•
Round Trip Time (msec)
•
If the round trip time has not been entered, the [Modify] button cannot be clicked.
•
If the entered round trip time does not satisfy the input conditions, an error screen appears. If this
occurs, check the parameter settings.
4
Click the [Modify] button
A confirmation screen appears.
5
Click the [OK] button.
The round trip time measurement result is updated in the ETERNUS DX.
640
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
P2X0-1270-13ENZ0