Appendix A Parameter List
A.1 System Management
A.1.7
Network Management
A.1.7.1
Setup Network Environment
For details about this function, refer to
For the factory default settings for this function, refer to
■
When using IPv4
●
LAN
•
Speed and Duplex
Description
Input condition/
Display contents
•
Wake on LAN
Description
Input condition/
Display contents
This item is not displayed when an FST port is selected.
●
Interface
•
Master IP Address
Description
Input condition/
Display contents
"1.8.1 Setup Network Environment" (page
Select the communication speed and mode.
•
Automatic
•
1 Gbit/s
•
100 Mbit/s Half
•
100 Mbit/s Full
•
10 Mbit/s Half
•
10 Mbit/s Full
Select whether to "Enable" or "Disable" the WOL function (*1).
*1:
The WOL function starts up the ETERNUS DX, which is connected to LAN, from
another server or a PC via network.
•
Enable
•
Disable
Input the IP address for the Master CM of the ETERNUS DX.
•
Numeric characters
•
0 - 255
703
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
97).
"Appendix B Setup Network Environment" (page
978).
P2X0-1270-13ENZ0