Wide/Narrow; Data Zone-Ch/Gid; Data Delay Time; Home Gid - Kenwood TK-3180 Function Reference

17 LTR TRUNKING
!
Configuration using KPG-89D
•
Configuring the Scan Weight (Refer to FPRG
6.5.2 Scan Weight.)

17.1.3 Wide/Narrow

This function allows you to select the channel's
operational bandwidth.
You can select Wide or Narrow using KPG-89D.
!
Configuration using KPG-89D
•
Configuring the Wide/Narrow (Refer to FPRG
6.5.3 Wide/Narrow.)

17.1.4 Data Zone-CH/GID

This function is used to separate the CH/GID for Data
communications from the CH/GID for Voice
communications. (Refer to 25.1.2 Data Zone-CH/GID.)
You can configure the Data Zone-CH/GID using KPG-
89D.
!
Configuration using KPG-89D
• Configuring the Data Zone-CH/GID (Refer to
FPRG 6.5.4 Data Zone-CH/GID.)

17.1.5 Data Delay Time

This function allows you to configure the duration from the
time the transceiver starts transmitting to the time when it
starts transmitting LTR Data. You can use this function
when it is difficult for the transceiver to link to the
repeater.
You can configure the Data Delay Time using KPG-89D.
!
Configuration using KPG-89D
• Configuring the Data Delay Time (Refer to FPRG
6.5.5 Data Delay Time)

17.1.6 Home GID

This function allows the transceiver to jump to the
frequently used GID with a press of the key.
Home CH/GID.)
You can configure the Home GID using KPG-89D.
!
Configuration using KPG-89D
•
Configuring the Home GID (Refer to FPRG 6.5.6
Home GID.)
•
Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
58

17.1.7 Home GID Operator Selectable

This function allows a user to configure the Home GID.
When this function is enabled, the user can change the
Home GID by selecting the channel to be configured as
the Home GID and pressing and holding the PF Home
CH/GID key for more than 3 seconds.
You can enable/disable the Home GID Operator
Selectable function using KPG-89D.
!
Configuration using KPG-89D
•

17.1.8 Time-out Timer (Dispatch)

The Time-out Timer (Dispatch) is the maximum
continuous transmission time to communicate using the
Dispatch ID.
You can configure the Time-out Timer (Dispatch ID) using
KPG-89D.
!
Configuration using KPG-89D
•

17.1.9 Time-out Timer (Telephone)

The Time-out Timer (TEL) is the maximum continuous
transmission time to communicate using the Telephone
ID. (Refer to 11.2.2 Time-out Timer (Telephone).)
You can configure the Time-out Timer (Telephone) using
the KPG-89D.
!
Configuration using KPG-89D
•
(Refer to 2.7
Function Reference
Configuring the Home GID Operator Selectable
function (Refer to FPRG 6.5.7 Home GID Operator
Selectable.)
(Refer to 11.2.1 Time-out Timer (Dispatch).)
Configuring the TOT (Dispatch) (Refer to FPRG
6.5.8 Time-out Timer (Dispatch).)
Configuring the TOT (Telephone) (Refer to FPRG
6.5.9 Time-out Timer (Telephone).)
Version: 1.11