Zone Description; Transmit/Receive Frequency; Transmit Output Power - Kenwood TK-3180 Function Reference

1 BASIC FUNCTION
1.2

Zone Description

Zone Data
Conventional
Conventional Data
Data
Zone Data
Channel Data
Trunking System Data
Trunking System Data
Zone Data
Repeater Data
Group ID Data
Figure 1-3 Zone Description
You can configure Conventional Groups/Trunking
Systems for each Zone using KPG-89D.
You can configure a maximum of 128 Zones for each
transceiver.
Conventional Groups consist of Simplex and Semi-duplex
Conventional Channels.
Trunking Systems consist of Group IDs (GIDs) that utilize
the LTR (Logic Trunked Radio) Trunking protocol.
You can configure each Zone as a Conventional Group or
a Trunking System.
You can configure a maximum of 250 CH/GIDs for each
zone and a maximum of 512 CH/GIDs for each
transceiver.
Note:
" The number of Zones that you can configure varies depending
on the number of CH/GIDs and Repeaters.
" The number of CH/GIDs that you can configure to each Zone
varies depending on the number of Zones and Repeaters.
4
Conventional Group
Data Group
Group
Channel Data
Channel Data
Trunking System Data
Group ID Data
Group ID Data
1.3

Transmit/Receive Frequency

This is a frequency pair used for transmitting and
receiving data.
In Conventional Groups, you can configure the transmit/
receive frequencies for each channel using KPG-89D.
In Trunking Systems, you can configure transmit/receive
frequencies for each Repeater using KPG-89D.
Table 1-5 Transmit/Receive Frequency, Step
Model
TK-2180
TK-3180
TK-7180
TK-8180
*1: Supporting the updated version.
!
Configuration using KPG-89D
•
Configuring the transmit frequency and the receive
frequency to a channel. (Refer to 6.3.3 Receive
Frequency, 6.3.4 Transmit Frequency.)
•
Configuring the transmit frequency and the receive
frequency to the Home Repeater (Refer to 6.4.3
Receive Frequency and 6.4.4 Transmit
Frequency.)
1.4

Transmit Output Power

Select Low when a repeater or the receiving party is
nearby to save power.
This will extend the serviceable operation time of the TK-
2180/ 3180.
You can configure the transmit output power for each CH/
GID using KPG-89D.
Function Reference
Transmit/Receive Frequency
Type
Range [MHz]
K 136 - 174
400 - 470 *1
K
450 - 520
K 136 - 174
400 - 470 *1
K
450 - 520
Step [KHz]
2.5/ 5.0/ 6.25/ 7.5
5.0/ 6.25
2.5/ 5.0/ 6.25/ 7.5
5.0/ 6.25
Version: 1.11