Signal Strength Indicator; Battery Status/Warning - Kenwood TK-3180 Function Reference

3 DISPLAY
Icon
•
AUX B/VOX icon
The status of the AUX B is displayed for
the TK-7180/ 8180 and the status of the
(Middle)
VOX function is displayed for the TK-
2180/3180.
•
Operator Selectable Tone icon
This icon displays the status of the
(Right)
Operator Selectable Tone.
•
Auto Recording icon
This icon displays the status of the Auto
(Left)
Recording function.
•
Auto Reply Message icon
This icon is displayed in Auto Reply
(Right)
Message Mode .
•
Battery Indicator icon
This icon displays the status of the
Battery Indicator. This icon appears
only when using the TK-2180/3180.

3.4.1 Signal Strength Indicator

This function allows you to display the transceiver's
information.
When this function is enabled, the signal strength of
the receive signal appears.
表 3-2 Signal Status
Icon Status
TK-2180/3180
High
Medium
Low
Very Carrier exits.
weak
None No signal
Note: The signal strength in room temperature is used as the
indication.

3.4.2 Battery Status/Warning

(TK-2180/3180 Only)
20
Function
Signal Strength (dBm)
TK-7180/8180
-80 - -74 -
-95 - -80 -92 - -74
-110 - -95 -110 - -92
Carrier exits.
-110 -110
No carrier No carrier
This function notifies and warns the battery's
remaining status to the user.
The battery status is displayed in 4 levels when this
function is enabled.
With this function enabled, the transceiver emits the
Beep or displays the warning when the battery voltage
level becomes low.
You can enable/disable this function using KPG-89D.
表 3-4 Battery Warning Operation
Battery Warning
Off
While transmitting
Always
Always w/beep
Note:
" The status of the alkaline batteries cannot be displayed.
" Select "Always" or "Always w/beepî in the While transmitting
configuration.
! Configuration using KPG-89D
• Configuring the Battery Status (Refer to 6.7.3
Common-Page 3 tab - Battery Status.)
• Configuring the Battery Warning (Refer to 6.7.3
Common-Page 3 tab - Battery Warning.)
Function Reference
表 3-3 Battery Status Icon List
Icon Status
High
Sufficient
Low
Very Low
Operation
You can transmit regardless of the
Battery voltage and the Battery warning
display does not appear.
The TX LED blinks red while
transmitting.
The TX LED blinks red while
transmitting.
The TX LED always blinks red and the
transceiver emits the Battery Warning
Tone.
Version: 1.11