Lcd Brightness1; Icons - Kenwood TK-3180 Function Reference

The backlight LED lights when pressing any key other
than the PTT switch and/or turning the Volume Control.
The Backlight lights for approximately 5 seconds and
turns Off when no key is pressed after it turns On.
! Configuration using KPG-89D
• Assigning functions to the PF keys (Refer to 6.8
Key Assignment.)
3.3.2 LCD Brightness
(TK-7180/8180 only)
You can adjust the brightness of the backlight LED
when using it in dark places or at night.
You can change the brightness of the backlight LED in
3 levels by pressing the PF LCD Brightness key. The
brightness changes in the following order: High
Off. The configuration of the backlight LED brightness
is stored even if the transceiver is turned OFF.
You can also configure the brightness of the backlight
LED using KPG-89D.
! Configuration using KPG-89D
• Configuring the LCD Brightness Level (Refer to
6.7.1 Common-Page 1 tab - LCD Brightness.)
• Assigning functions to the PF keys (Refer to 6.8
Key Assignment.)

3.4 Icons

The transceiver has the following icons.
表 3-1 Icon List
Icon
•
RSSI icon
This icon indicates the signal strength.
•
Priority Channel icon
This icon represents the Priority
Channel status.
There are three types of Priority
Channel icons.
: Priority 1 Channel
: Priority 2 Channel
: Priority 1 & 2 Channel
Version: 1.11
− −
Low
Function
Function Reference
Icon
•
Monitor On icon
This icon displays the status of the
Monitor function and the signaling.
•
Scan Mode icon
This icon indicates the status of the
Scan. There are two types of Scan
Mode icons.
Solid: Performing or pausing the Scan
Blink: Inhibiting the Scan during Scan
Mode.
•
Telephone ID icon
Solid: Displaying the status of the
Telephone ID
Blink: Displaying the status of the Auto
Telephone Search
•
Message Stack icon
This icon indicates the status of the
Message Stack. There are two types of
Scan Mode icons.
Lighting: Operating in Auto Recording
Mode
Flashing: Writing data in memory while
the transceiver is in Auto
Recording Mode
•
Talk Around icon
This icon indicates the status of the Talk
Around function.
•
Horn Alert icon
This icon indicates the status of the
Horn Alert function.
•
Scrambler icon
This icon indicates the status of the
Scrambler function.
•
Public Address icon (TK-7180/8180
only)
This icon indicates the status of the
Public Address function.
•
Low Transmit Power icon (TK-2180/
3180 only)
This icon indicates the status of the Low
Transmit Power function.
•
Zone Add icon
This icon indicates the status of the
(Left)
Zone Add function.
•
CH/GID Add icon
This icon indicates the status of the CH/
(Right)
GID Add function.
•
AUX A/VOX icon
The status of the AUX A appears for the
TK-7180/ 8180 and the status of the
(Left)
VOX function appears for the TK-2180/
3180.
3 DISPLAY
Function
19