Manual Instructions - I/O-Box - GE AKTA avant User Manual

9.8.5

Manual instructions - I/O-box

The following table describes the I/O-box related manual instructions available for ÄKTA
avant.
Instruction name
Auto zero analog in X
Reset auto zero analog in
X
Noise reduction analog
in X
Digital out X
Pulse digital out X
Configure analog out X
ÄKTA avant User Manual 29035184 AE
Description
Sets the value of the analog signal in the analog port
number X to 0 mV.
Sets the signal in analog port number X to its current
value, i.e. the actual voltage in the analog port number
X.
Filters the noise in the analog signal in port number X.
Sets the value of the signal sent out by digital port
number X to either 0 or 1. The default value is 1.
Generates a pulsed signal in digital port number X. The
signal changes from the initial state (0 or 1) to the oppo-
site state and returns to the initial state after the defined
length of time.
Enables the user to send one of the pre-defined signals
(UV signal, conductivity, temperature, pH or concentra-
tion of eluent B) to the analog out port number X, and
also to set the range of that signal.
9 Reference information
9.8 Using Manual instructions
9.8.5 Manual instructions - I/O-box
487