GE AKTA avant User Manual page 204

5 Operation
5.8 Fractionation
5.8.1 Prepare the built-in fraction collector
Workflow for preparing the
built-in fraction collector
Before starting to prepare the built-in fraction collector, check the fractionation settings
in the method to be run. Perform the steps described below according to the settings in
the method.
Step
1
2
Prepare cassettes and insert the
cassette tray
Follow the instructions to prepare the fraction collector before a run.
Step
1
204
Operator actions
Insert the cassette tray or a rack for
tubes or bottles.
Change the System Settings in
UNICORN to set the fractionation
mode and other settings for fraction
collection.
Action
If you are to use cassettes with the QuickRelease function, first open the
cassettes.
Reference to instructions
See Prepare and insert the cassette
tray below.
See UNICORN System Control
Manual.
Available System Settings are de-
scribed in Section 9.7.7 System
settings - Fraction collection, on
page 468.
ÄKTA avant User Manual 29035184 AE