Yamaha MT-10 2023 Owner's Manual page 87

1
2
1. Oil filter cartridge
2. Oil filter wrench
TIP
An oil filter wrench is available at a
Yamaha dealer.
5. Apply a thin coat of clean engine
oil to the O-ring of the new oil filter
cartridge.
Periodic maintenance and adjustment
1. O-ring
TIP
Make sure that the O-ring is properly
seated.
6. Install a new oil filter cartridge, and
then tighten to the specified
torque.
1
1. Torque wrench
8-12
Tightening torque:
Oil filter cartridge:
1
17 N·m (1.7 kgf·m, 13 lb·ft)
7. Install the engine oil drain bolt and
its new gasket, and then tighten
the bolt to the specified torque.
Tightening torque:
Engine oil drain bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
8. Refill with the specified amount of
the recommended engine oil.
TIP
Wipe off any spilled oil before starting
the engine.
9. Check the O-ring for damage, and
then install the oil filler cap.
1
2
3
4
5
6
7
8
9
10
11
12
13