Yamaha MT-10 2023 Owner's Manual page 86

Periodic maintenance and adjustment
1
1
2
3
4
5
1. Engine oil level check window
2. Maximum level mark
6
3. Minimum level mark
4. If the engine oil is at or below the
7
minimum level mark, remove the
oil filler cap and add oil
8
9
10
11
12
13 1. Engine oil filler cap
2. O-ring
5. Check the O-ring for damage, and
replace if necessary.
6. Install the engine oil filler cap.
To change the engine oil (and filter)
1. Start the engine, warm it up for
2
several minutes, and then turn it
off.
3
2. Place an oil pan under the engine
to collect the used oil.
3. Remove the engine oil filler cap,
the engine oil drain bolt and its
gasket to drain the oil from the
crankcase.
1
2
1. Engine oil filler cap
8-11
1. Engine oil drain bolt
2. Gasket
TIP
Skip steps 4–6 if the oil filter cartridge is
not being replaced.
1 1 1
4. Remove the oil filter cartridge with
an oil filter wrench.
2
1