Yamaha MT-10 2023 Owner's Manual page 37

Warning icons
1 2
1000 r/min
1. Auxiliary system warning "
2. Coolant temperature warning "
3. Oil pressure warning " "
4. Fuel level warning " "
5. Error mode warning "Err"
When an error is detected, the following
error-related warning icons will then be
viewable.
Auxiliary system warning "
This icon appears if a problem is de-
tected in a non-engine-related system.
Coolant temperature warning "
This icon appears when the coolant
temperature is high. Stop the vehicle
and turn off the engine. Allow the en-
gine to cool.
NOTICE
3 4 5
Do not continue to operate the en-
gine if it is overheating.
12 : 00
Er r
Oil pressure warning "
This icon appears when the engine oil
pressure is low. When the vehicle is
first turned on, engine oil pressure has
yet to build, so this icon will come on
"
and stay on until the engine has been
"
started.
TIP
If a malfunction is detected, the oil pres-
sure warning icon will flash repeatedly.
NOTICE
Do not continue to operate the en-
"
gine if the oil pressure is low.
Fuel level warning "
This icon comes on when approximate-
"
ly 4.0 L (1.06 US gal, 0.88 Imp.gal) of
fuel remains in the tank.
Instrument and control functions
Error mode warning "Err"
When an internal error occurs (e.g.,
ECA10022
communication with a system controller
has been cut off), the error mode warn-
ing will appear as follows.
"Err" and "
"Err" only indicates an ABS ECU error.
"
TIP
Depending on the nature of the error,
the display may not function properly
and YRC settings may be impossible to
change. Additionally, ABS may not
function properly. Use extra care when
braking and have a Yamaha dealer
check the vehicle immediately.
Information display
ECA26410
The information display items are:
A.TEMP: air temperature
C.TEMP: coolant temperature
TRIP-1: tripmeter 1
TRIP-2: tripmeter 2
" F-TRIP: fuel reserve tripmeter
ODO: odometer
"
FUEL AVG: average fuel consumption
CRNT FUEL: current fuel consumption
FUEL CON: the amount of fuel con-
5-9
" indicates an ECU error.
": cruise control speed setting
1
2
3
4
5
6
7
8
9
10
11
12
13