Yamaha MT-10 2023 Owner's Manual page 52

Instrument and control functions
1
Display Setting
MPH
DISPLAY-1
2
STREET MODE 1 - 1
STREET MODE 1 - 2
3
TRACK MODE
4
5
4. Select the desired information dis-
play item with the wheel switch.
6
Display Setting
MPH
7
DISPLAY-1
STREET MODE 1 - 1
8
STREET MODE 1 - 2
TRACK MODE
9
10
TIP
11
The information display items which
can be selected are:
12
A.TEMP: air temperature
C.TEMP: coolant temperature
13
TRIP-1: tripmeter 1
TRIP-2: tripmeter 2
ODO: odometer
SPEED: cruise control speed set-
10 : 00
GPS
ting
FUEL AVG: average fuel consumption
A.TEMP
CRNT FUEL: current fuel consumption
C.TEMP
FUEL CON: the amount of fuel con-
C.TEMP
sumed
5. Select "STREET MODE 1-2" or
"TRACK MODE" to set the remain-
ing DISPLAY-1 group items.
MPH
10 : 00
GPS
STREET MODE
STREET MODE
A.TEMP
TRACK MODE
C.TEMP
C.TEMP
6. Select the triangle symbol to exit.
To set the other display groups, re-
peat from step 3.
"Brightness"
This module allows you to adjust the
general brightness level of the display
screen.
10 : 00
Display Setting GPS
DISPLAY-1
1 - 1
A.TEMP
1 - 2 C.TEMP
C.TEMP
5-24
"Grip Warmer Setting" (if equipped)
This module is for adjusting the temper-
ature values for the grip warmer pre-
sets (LO/MIDDLE/HIGH). Each preset
can be set from 1 (low heat) to 10 (high
heat).
"Clock"
This module allows you to set the clock.
"All Reset"
This module resets everything, except
the odometer and clock, to its factory
preset or default setting.
Select YES to reset all items. After se-
lecting YES, all items will be reset and
the screen will automatically return to
the MENU screen.