Display - Yamaha MT-10 2023 Owner's Manual

Instrument and control functions
TIP
1
When the vehicle is turned on, this light
should come on for a few seconds and
2
then go off. If the light does not come
on, or if the light remains on, have a
3
Yamaha dealer check the vehicle.
4
Oil pressure and Coolant tempera-
5
ture warning light "
This warning light comes on if the en-
6
gine oil pressure is low or if the coolant
temperature is high. If this occurs, stop
7
the engine immediately.
TIP
8

When the vehicle is first turned on,
this light should come on until the
9
engine is started.

If a malfunction is detected, this
10
light will come on and the oil pres-
sure icon will flash.
11
NOTICE
12
If the oil pressure and coolant warn-
ing light does not go off after start-
13
ing the engine or if it comes on while
the engine is running, stop the vehi-
cle and engine immediately.

If the engine is overheating, the
coolant temperature warning
icon will come on. Let the en-
gine cool. Check the coolant
level (see page 8-36).

If the engine oil pressure is low,
the oil pressure warning icon
EAU88362
will come on. Check the oil level
(see page 8-10).
"

If the warning light remains on
after letting the engine cool and
confirming the proper oil level,
have a Yamaha dealer check the
vehicle. Do not continue to op-
erate the vehicle!
Auxiliary system warning light "
This warning light comes on if a prob-
lem is detected in a non-engine-related
system.
ECA22441 TIP
When the vehicle is turned on, this light
should come on for a few seconds and
then go off. Otherwise, have a Yamaha
dealer check the vehicle.

Display

The display has two different main
screen
MODE and TRACK MODE. Most of the
functions are viewable in either mode,
but the layout differs slightly. The fol-
lowing items can be found on the dis-
play.
EAU88370
"
5-6
EAU95512
display modes, STREET