Catalytic Converter; Seat - Yamaha MT-10 2023 Owner's Manual

Catalytic converter

The exhaust system contains catalytic
converter(s) to reduce harmful exhaust
emissions.
WARNING
The exhaust system is hot after op-
eration. To prevent a fire hazard or
burns:

Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.

Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.

Make sure that the exhaust sys-
tem has cooled down before do-
ing any maintenance work.

Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.
EAU13435

Seat

To remove the seat
1. Open the seat lock cover, insert
EWA10863 the key into the seat lock, and then
turn the key counterclockwise.
3 3
2 2 2
1 1
1. Seat lock cover
2. Seat lock
3. Unlock.
2. While holding the key in that posi-
tion, slide the seat backward and
then lift the rear of the seat up, and
then pull the seat off.
To install the seat
1. Insert the projections into the seat
holders as shown.
Instrument and control functions
EAU94110
1. Projection
2. Seat holder
TIP
Make sure that the seat is properly se-
cured before riding.
NOTICE
The IMU is located under the seat. It
is not user serviceable and very sen-
sitive, so we advise against handling
the IMU directly.

5-31
1
2
2. Push the rear of the seat down to
lock it in place.
3. Remove the key.
Do not remove, modify, or place
any foreign materials in or
around the IMU.
1
2
3
4
2 2 2
5
6
7
8
9
ECA27380
10
11
12
13