Replacing a turn signal light bulb
1.
Remove the turn signal light lens by
removing the screw.
2
1. Turn signal light lens
2. Screw
2.
Remove the burnt-out bulb by
pushing it in and turning it
counterclockwise.
Periodic Maintenance And Adjustment
1
1. Turn signal light bulb
3.
Insert a new bulb into the socket,
push it in, and then turn it clockwise
until it stops.
4.
Install the lens by installing the
screw. NOTICE: Do not overtigh-
ten the screw, otherwise the lens
may break.
Supporting the motorcycle
1
1. Maintenance stand (example)
Since this model is not equipped with a
centerstand, use maintenance stands
when removing the front or rear wheel
or when performing other maintenance
that requires the motorcycle to stand
upright.
Check that the motorcycle is in a stable
and level position before starting any
maintenance.
7-37
1
7