Handlebar Switches - Yamaha MT-09 Owner's Manual

Instrument And Control Functions

Handlebar switches

Left
1
2
4
3
4
1. Pass switch " "
2. Dimmer switch " / "
3. Turn signal switch " /
4. Horn switch " "
5. Traction control system switch "TCS"
Right
5
1. Start/Engine stop switch "
2. Drive mode switch "MODE"
3. Hazard switch "
"
Pass switch "
Press this switch to flash the headlights.
TIP
When the dimmer switch is set to "
the passing switch has no effect.
Dimmer switch "
Set this switch to "
and to "
7-36.)
1
2
3
/ / "
"
"
",
/ "
" for the high beam
" for the low beam.(See page
4-4
Turn signal switch " /
To signal a right-hand turn, push this
switch to " ". To signal a left-hand turn,
push this switch to " ". When released,
the switch returns to the center position.
To cancel the turn signal lights, push
the switch in after it has returned to the
center position.
Horn switch " "
Press this switch to sound the horn.
Traction control system switch
"TCS"
See page 3-1 for an explanation of the
traction control system.
Stop/Run/Start switch "
To crank the engine with the starter,
set this switch to " ", and then push
the switch down towards "
page 6-1 for starting instructions prior
to starting the engine.
Set this switch to " " to stop the
engine in case of an emergency, such
as when the vehicle overturns or when
the throttle cable is stuck.
"
/ / "
". See