Setting Your Preferences; Setting Clock; Setting 12 Or 24 Hour Mode; Changing Between °F Or °C - Electrolux EI30GF45QS Use And Care Manual

32

Setting Your Preferences

Setting clock

See the example below to set the clock to 1:30.
Step
1. Press SET CLOCK.
2. Enter 1:30 to advance to 1:30.
3. Press START to accept or
press CANCEL to reject.

Setting 12 or 24 hour mode

The clock display mode allows you to choose
between 12 and 24 hour mode. The factory preset
clock display mode is 12 hour.
See the example below to change the default
mode to 24 hour.
Step
1. Press and hold SET CLOCK
for 3 seconds until "12Hr dAy"
or "24Hr dAy" appear in the
display.
2. Press SELF CLEAN to switch
between the 12 and 24 hour
mode.
3. Press START to accept or
press CANCEL to reject.
Example
Press
Example
Press
3 sec
Changing between °F or °C
Your control has the ability to display and set
Fahrenheit or Celsius temperatures. The factory
preset temperature display is Fahrenheit.
See the example below to change the default
temperature display to Celsius.
Example
Step
1. Press and hold BROIL for 3
seconds until F or C appear in
the display.
2. Press SELF CLEAN to switch
between the F and C mode.
3. Press START to accept or
press CANCEL to reject.
Adjusting oven temperature

User preference offset

Your appliance has been factory calibrated and
tested to ensure an accurate baking temperature.
For the fi rst few uses, follow your recipe times and
temperature recommendations carefully.
If you feel your oven is too hot or too cool from your
baking experience, the oven temperature may be
adjusted to your liking. The temperature may be
increased up to +35°F (+19°C) or decreased down
to -35°F (-19°C) from normal.
See the example below to increase the
temperature.
Example
Step
1. Press and hold BAKE for 3
seconds until UPO appear in
the display.
2. Enter the desired temperature change using
the number pads. SELF CLEAN can be
pressed to lower the temperature.
3. Press START to accept or
press CANCEL to reject.
Press
3 sec
Press
3 sec