Bake - Electrolux EI30GF45QS Use And Care Manual

Gas range
Hide thumbs Also See for EI30GF45QS:
Table of Contents

Advertisement

16
Setting Oven Controls

Bake

Use the bake feature to cook most food items that
require normal cooking temperatures.
The following temperature settings apply to the
bake feature:
• Auto-suggest (default) setting: 350°F/177°C
• Min. bake setting: 170°F / 77°C
• Max. bake setting: 550°F / 288°C
Setting bake
See example below to set a bake to start
immediately using the default temperature.
Step
1. Press BAKE
If needed, use numeric keypads to enter a
different oven temperature.
2. Press START
Once START is pressed the oven will begin heating.
The oven display shows the temperature rising.
After the oven reaches set temperature a beep will
indicate the oven is ready. The oven will continue to
maintain this temperature until the cooking feature is
canceled.
NOTE
To cancel the function, you may press CANCEL
at any time when setting the control or during the
cooking process.
To change the set temperature while the oven is
already heating, just enter the temperature using
the numeric pads.
During the preheating, the convection fan will
be activated to allow the oven to reach its
target temperature faster. After 6 minutes, the
convection fan will pulse on and off for better heat
distribution.
Example
Press
For best results
• As much as possible, use only one rack on
position 2 or 3 and center the pans. If using two
racks, place the oven racks in position 2 and 4.
• When placing multiple food items in the oven
allow 2-4" (5-10cm) of space between the food
items for proper air circulation.
• Dark or dull pans absorb more heat than shiny
bakeware resulting in dark or overbrowning
of foods. It may be necessary to reduce the
oven temperature or cook time to prevent
overbrowning of some foods. Dark pans
are recommended for pies. Shiny pans are
recommended for cakes, cookies and muffi ns.
Pan position for one rack baking.
Pan position for two rack baking.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents