Operating Instructions; Cleaning The Lint Filter; Loading The Dryer; Adding Fabric Softener - Maytag Neptune MDE7550AGW User Manual

O
I
PERATING
C L
LEANING THE INT
The lint filter is a "slide-in" filter located at the front of the door opening. Remove lint from filter and replace.
WARNING:
L D
OADING THE RYER
The maximum clothes load for the Maytag Neptune
• When only one or two articles need drying, add a few similar items to improve tumbling and drying efficiency.
• When drying large, bulky items such as a blanket or duvet, it may be necessary to reposition the load during the cycle to ensure
even drying.
Load the dryer properly...
• By placing only one wash load in the dryer at a time.
• By avoiding very small loads or mixing heavyweight or lightweight clothes.
Do not overload the dryer, as a reduction in efficiency or damage to the machine may result.
WARNING:
A F S
DDING ABRIC
After loading the dryer, a fabric softener sheet may be added to control static cling.
Add a fabric softener sheet (if desired)...
• Before the load becomes warm. This helps prevent greasy-looking softener stains.
• And remove any used softener sheets from the dryer to prevent softener stains.
S P
ET THE ROGRAMME
There are five choices for dryer programmes. Select the appropriate programme and follow the touchscreen prompts.
S D
ENSOR RY
Sensor Dry is the fastest and most energy efficient drying method. There are two sensor bars monitoring the drying progress.
When it has dried to the desired setting, the dryer will cool down to minimize creases. Options for dryness levels include Least
Dry to Most Dry. Least Dry will leave the clothes feeling slightly damp for touch up ironing. Most Dry will completely dry items.
To use this programme, select "Sensor Dry" from the Home Screen. See the following section for more details on using Sensor
Dry.
NSTRUCTIONS
F
ILTER
Do not operate the dryer without the lint filter in place.
OFTENER
® dryer is 8 kg Cottons.
5