Elo TouchSystems 3243L User Manual page 6

Connector Panel & Interfaces
Note: DVI or HDMI are available on certain models only.
Touchmonitor Connections
1. Connect a video cable from your host computer to the monitor. For VGA cables, tighten the
video cables screws for best performance.
2. Connect the USB touch cable between the monitors USB connector and your PC's USB port.
(Not applicable for No Touch models)
3. Connect the power cable to the monitors input power jack and the AC power outlet.
4. The touchmonitor ships in the ON state.
Installing the Touch Technology Software Drivers
No additional drivers are required for your projected-capacitive touchmonitor with Windows 7
and 8 operating systems, it uses Windows HID drivers.
To download latest touch drivers
1. Visit www.elotouch.com/Support/Downloads/Driver/DriverDownload/Default.aspx
2. Select the operating system from "Operating System" dropdown menu.
User Manual: 43L Series
SW601960 Rev D, Page 6 of 28