Elo TouchSystems 3243L User Manual page 13

Rear VESA Mount
For ET3243L Monitors:
A four-hole 400x200mm mounting pattern for M6 screws is provided on the rear of the monitor.
The VESA FDMI-compliant counting is coded: VESA MIS-F, 400, 200, 6.
For the 4243L Monitor:
A four-hole 400x400mm mounting pattern for M6 screws is provided on the rear of the monitor.
The VESA FDMI-compliant counting is coded: VESA MIS-F, 400, 400, 6.
Refer to www.elotouch.com for dimensional drawings.
User Manual: 43L Series
SW601960 Rev D, Page 13 of 28