Connecting The Device; Selecting The Mask Type; Using The Mask-Fitting Feature - ResMed S8 AutoSet II User Manual

Connecting the Device

LCD and Keypad

Selecting the Mask Type

To ensure your device functions as intended with your selected mask, you need to
select the mask type that you are using.
1
With the RAMP or SETTLING screen displayed, press
standby screen displays RAMP. In AutoSet mode (S8 AutoSet II only) the
standby screen displays SETTLING.)
2
Press until MASK is displayed.
3
Press to change the setting.
4
Press or
5
Press to apply.

Using the Mask-fitting Feature

You can use the S8 Series II mask-fitting feature to help you fit your mask properly. This
feature delivers air pressure for a three-minute period, prior to starting treatment,
during which you can check and adjust your mask fit to minimize leaks.
Note: Make sure that the mask setting on the MASK screen is the same as the mask you
are using.
1
Fit your mask as described in the mask user instructions.
2
With the RAMP or SETTLING screens displayed, hold down
three seconds until air pressure delivery starts.
1
3
until you see the setting that you require.
2
4
. (In CPAP mode, the
for at least
Setting up the S8 Series II 3