ResMed S8 AutoSet II User Manual page 10

Settings Menu
Select
You can use the Settings menu to change the:
Expiratory Pressure Relief (EPR) settings – see page 6.
•
Mask type – see page 3.
•
Tube length
•
Scroll to TUBE LENGTH and select
Press
Front cap
•
You can set up your device to use the front cap accessory.
Scroll to HUMID and select
Press
SmartStart settings
•
SmartStart enables your device to start automatically when you breathe into the
mask.
Scroll to SMARTSTART and select
Press
Leak alert settings
•
Leak alert indicates when a high mask leak is present.
Scroll to LEAK ALERT and select
Press
Results Menu
Select
You can use the Results menu to view the total number of hours of treatment (USED
HRS) and the number of sessions that the S8 AutoSet II was used in a usage period
(USAGE).
Note: Your clinician may have customized your device to display Smart Data. Contact
your clinician for further details about Smart Data.
Options Menu
Select
You can use the Options menu to change the language setting. Scroll to LANG and
select . Press
Servicing Menu
Select
You can use the Servicing menu to view the device system information.
8
on the Settings menu to access the options in this menu.
or until you see the setting that you require.
or until you see the setting that you require.
or to change the option to ON or OFF .
or to change the option to ON or OFF .
on the Results menu to access the options in this menu.
on the Options menu to access the options in this menu.
or
on the Servicing menu to access the options in this menu.
.
.
.
.
until you see the setting that you require.