Programmable Features - Dodge 2016 GRAND CARAVAN User Manual

Hide thumbs Also See for 2016 GRAND CARAVAN:
Table of Contents

Advertisement

E L E C T R O N I C S

PROGRAMMABLE FEATURES

Electronic Vehicle Information Center (EVIC) — If Equipped
Personal Settings allows you to set and recall features when the transmission is in PARK.
If the transmission is out of PARK or the vehicle begins moving, a warning message
SYSTEM SETUP NOT AVAILABLE VEHICLE NOT IN PARK displays when you try to select
"System Setup" from the main menu.
The EVIC can be used to program the following Personal Settings. Push the RIGHT arrow
button
until Personal Settings displays, then push the DOWN button
through the settings. Push the RIGHT arrow button
• Select Language
• Nav-Turn By Turn
• Auto Lock Doors
• Auto Unlock Doors
• Remote Unlock Sequence
• Remote Start Comfort Sys.
• Horn with Remote Lock
• Flash Lamps With Lock
• Headlamp Off Delay
• Headlamps With Wipers
Key Fob Programmable Features
The following features may also be programmed by using the Key Fob transmitter or the
ignition and driver's door lock switch. Refer to "Uconnect Settings" in "Understanding
Your Instrument Panel" in the Owner's Manual on the DVD for further information.
NOTE:
Pushing the LOCK button while you are inside the vehicle will activate the Vehicle Security
Alarm. Opening a door with the Vehicle Security Alarm activated will cause the alarm to
sound. Push the UNLOCK button to deactivate the Vehicle Security Alarm.
Unlock On First Press
To unlock either the driver's side, or all doors, on the first press of the UNLOCK button:
• Push and hold the LOCK button for at least four seconds, but no longer than 10 seconds.
Then, push and hold the UNLOCK button while still holding the LOCK button.
• Release both buttons at the same time.
Auto Unlock Doors On Exit
To have all of the vehicle doors unlock when any door is opened:
• Enter your vehicle and close all the doors, and fasten your seat belt.
• Cycle the ignition switch between the LOCK and ON position four times, ending in the
LOCK position (do not start the engine).
• Push the power door UNLOCK switch to unlock the doors. A single chime will indicate
that programming is complete.
78
to change the setting.
• Key-Off Power Delay
• Illuminated Approach
• Hill Start Assist
• Flashers with Sliding Door
• Calibrate Compass
• Compass Variance
• Park Assist - If Equipped
• Automatic High Beams - If Equipped
• Keyless Enter-N-Go - If Equipped
• RKE Linked To Memory - If Equipped
to scroll

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents