Preliminary Setup With Windows Vista - Audio Technica AT2005USB Instruction Manual

1. Plug the free end of the USB cable into the USB port on your computer. The microphone's blue
LED will illuminate, indicating the mic is receiving power. Your computer will automatically
recognize the USB device and install a driver.
2. In the lower right portion of your screen you may see a message that new hardware was found;
or you may see a driver software installation notice.
3. To select the AT2005USB as your default recording device, begin at your
Select Control Panel.
4. Select (double-click) Sound.
5. Select the Recording
recording device. (You should see a green check mark beside the USB microphone icon.)
Your preferences are now set to use the AT2005USB with Windows Vista with the recording program
of your choice.

Preliminary setup with Windows Vista

tab. Make sure that the
Microphone
SigmaTel C-Major Audio
Working
Microphone
AT2005USB
Working
AT2005USB microphone is set as the default
menu.
Start
9