Utility Functions; Flipping The Display; Locking The Keypad - Midland Micro Mobile MXT100 Manual

 The RX/TX icon will show continuously on the LCD display while
transmitting.
3. To receive a call, release the PTT button on the microphone.
 The RX/TX icon will show on the LCD display when your radio is
receiving a transmission.
4. If necessary, press the Volume Up
increase or decrease radio volume.

UTILITY FUNCTIONS

Utility functions let you configure several operational parameters of the
MXT100 to suit your personal preferences. For additional utility functions,
see "MENU" MODE FUNCTIONS.

Flipping the Display

The MXT100 incorporates a unique Display Flip function that allows the
unit to be installed upside-down, if required, and the display read from
either orientation.
To "flip" the LCD display:
1. Be sure the radio is turned off (see Power On/Off).
2. Press and hold the
Power On/Off
 The LCD display will rotate 180° from its most recent orientation.
3. Repeat steps 1 and 2 to return the LCD display to its previous
orientation.

Locking the Keypad

You can use the keypad "lock" function to prevent accidentally changing
your radio's settings. When the function is enabled, the current radio
settings are "locked" in place.
NOTE: When the "lock" function is enabled, the PTT button on the
microphone and the Volume Up
radio remain active.
midlandusa.com
Channel Down button, then press and hold the
button for two seconds to turn the radio on.
or Volume Down
/ Volume Down
Model MXT100
button to
buttons on the
Page 13