TurboChef VDOT730 Installation Manual page 5

IMPORTANT –
WARNING
To prevent possible damage to cabinets
and cabinet fi nishes, use only materials
and fi nishes that will not discolor
or delaminate and will withstand
temperatures up to 194°F (90°C). Heat
resistant adhesive must be used if the
product is to be installed in laminated
cabinetry. Check with your builder or
cabinet supplier to make sure that the
materials meet these requirements.
WARNING
The use of cabinets for storage above the
oven may result in potential fi re or burn
hazard.
WARNING
The misuse of the oven door(s) (e.g.
stepping, sitting, or leaning on them) can
result in hazards or injuries and damage
to the product.
WARNING
This appliance should not be used for
space heating. This information is based
on safety considerations.
CAUTION
During installation DO NOT remove the
top door of the double wall oven. DO
NOT push on the outer trim. Doing
so could cause the doors to misalign,
requiring repair and/or replacement.
Please Read and Follow!
your appliance has been properly
connected and grounded in accordance
with local codes or in absence of codes,
with the National Electrical Code (NEC).
ANSI/NFPA 70-latest edition.
ELECTRICAL FIRE HAZARD
Improper connection of aluminum house
wiring to copper leads can result in
an electrical hazard or fi re. Use only
connectors designed for joining copper to
aluminum and follow the manufacturer's
recommended procedure closely.
while handling and moving. Possible
use of appliance moving devices is
recommended.
DO NOT use the handle or oven door to
lift the oven. Remove door before
installation to ensure that it is not used to
lift the unit. Make sure latches are
properly locked in place before removing
door to prevent injury to hands and/or
fi ngers.
5
DANGER
ELECTRICAL SHOCK
HAZARD
To avoid risk of electrical shock,
personal injury or death; verify
WARNING
WARNING
MOVING HAZARD
To avoid risk of severe
personal injury; this appliance
requires two or more personnel
WARNING