Mounting; Orientation; Rigging; Procedure - Chauvet Ovation Min-E-10WW User Manual

Setup

Mounting

Orientation

Rigging

Procedure

Mounting Diagram
-6-
Before mounting this product, read and follow the
Professional line of mounting clamps, go to http://trusst.com/products/.
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Chauvet recommends using the following general guidelines when mounting this product.
·
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
·
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
·
If hanging this product, make sure that the mounting location can support the product's
weight. See the Technical Specifications
product.
·
When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET® Professional line of safety cables, go to http://trusst.com/products/.
The OVATION™ Min-E-10WW comes with a yoke to which you can either attach a mounting
clamp for hanging. You must supply your own mounting clamp. Make sure the clamp is capable
of supporting the weight of this product. For our Chauvet line of mounting clamps, go to
http://trusst.com/products/.
Mounting Clamp
Safety Loop
Safety Notes. For our CHAUVET®
for the weight-bearing requirements of this
Overhead Mounting
OVATION™ Min-E-10WW User Manual Rev. 2
Safety Cable