Epson BrightLink 475Wi Installation Manual page 58

8. When the pointers on the left and right become solid colors (
remote control. The following screen is displayed:
9. Place the markers at the top marker positions [1]. When angle adjustment is performed correctly, the
upper pointers become solid colors (
( ) ( ), start again from step 4.
10. Place the markers at the bottom marker positions [2]. When angle adjustment is performed correctly,
the bottom pointers become solid colors (
colors ( ) ( ), start again from step 4.
) (
) ( ). If the upper pointers do not become solid colors
) ( ). If the bottom pointers do not become solid
58
), press the button on the