Epson BrightLink 475Wi Installation Manual page 56

6. Attach the two markers you removed from the Touch Unit to the marker positions shown on the
projected screen (
Match the positions so that the crosses (
( ) ( ). Move the marker over the projected cross until the lines of the cross align with the lines
on the marker.
When pointers (
displayed on the left and right of the projection screen, attach the markers to the projection screen as
follows:
•
For magnetic screens: Place the bottom of the markers onto the screen.
•
For non-magnetic screens: Use the supplied tape to secure the markers. Attach the tape so that each
end of the marker is secure on the screen.
) ( ).
Blue marker
position
) overlap with the points (
) ( ) with the same color (blue and green) as the marker positions are
Correct position
Green marker
position
) on the marker positions
Incorrect position