Wiring And Connections; Connecting The Accessories - Clarion CMD8 Owner's Manual & Installation Manual

8) Wiring and Connections

Black
Black
USB cable
(connect to USB memory/
iPod/iPhone device)
Antenna
(Black)
Refer to the right
(Black)
WIRED REMOTES
18
CMD8
White
Black
Rear audio output (Left)/
Subwoofer output 1
Red
Black
Rear audio output (Right)/
Subwoofer output 2
White
Gray
Left
Front audio
output terminal
Right
Red
White
Red
Left
AUX IN
Right
Red
SiriusXM-Connect™ Vehicle Tuner to
be connected: Sold separately
Connect to external
wired Remote Control Unit
Gray
Front Right
Gray/Black
White
Front Left
White/Black
Purple
Rear Right
Purple/Black
Green
Rear Left
Green/Black
4-Speaker system
or
2-Speaker system
Gray
Front Right
Gray/Black
White
Front Left
White/Black
Purple
Purple/Black
Green
Not used.
Green/Black
Insulate each wire

9) Connecting the accessories

• Connecting to the external amplifier
External amplifiers can be connected to the 4 channel RCA output connections.
Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
16-Pin Connector Extension Lead
(attached to the source unit)
Yellow wire (Memory back-up lead)
Connect directly to battery
FUSE 15A
Red wire (Power lead)
Accessory 12V
Blue/White wire (Amplifier turn-on lead)
Connect to remote turn-on lead of amplifier
Black wire (Ground lead)
Connect to ground
Orange/White wire (Illumination lead)
Connect it to the power supply terminal
for illumination