Activating The Parallel Ieee 1284 Interface (Pd42 Only); To Activate The Parallel Ieee 1284 Interface - Intermec EasyCoder PD41 Installation Instructions

10 Reattach the cover.
When you turn on the printer, it automatically recognizes the Parallel IEEE
1284 interface. PD42 users have to activate the interface, see the next
section.

Activating the Parallel IEEE 1284 Interface (PD42 only)

On the PD42 printer, the parallel interface and the USB interface cannot be
active at the same time. USB is active by default, so in order to use the
parallel interface you must change this setting in Setup.

To activate the Parallel IEEE 1284 interface

1 Press Setup (
2 Navigate to Com > Interface.
3 In the Interface submenu, select IEEE 1284.
4 Press Enter (
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
©
2007 Intermec Technologies
Corporation. All rights reserved.
EasyCoder PD41/PD42 Parallel IEEE 1284 Interface Installation Instructions
*1-960661-01*
P/N 1-960661-01
).
).