Cisco TelePresence MX700 Installation Manual page 10

Installation guide for Cisco TelePresence MX700 Single camera - Floor stand
6
Lift left monitor onto floor stand
D
65 kg / 144 lb
Make sure that the screw
1
with wing nut enters the
center slot on both sides.
Do not let go of the monitor
before it is securely placed
on the floor stand.
78-100218-01 A0 | 2014 APRIL | © 2014 Cisco Systems, Inc. All rights reserved.
Rear view
Rear view
Tighten the wing nuts
2
on both sides. They are
accessed from the sides
of the monitor.
Page 10