Adjusting Head Position - Ricoh SGC 1506 Quick Manual

Adjusting Head Position (Continued)
Reference: Reference: Reference: See steps 7 to 12 in "Head Position Adjust", Troubleshooting. Reference:
Check the test pattern for Head Position Adjust Check the test pattern for Check the test pattern for Check the test pattern for
Check the optimal adjustment value based on the print results of the test pattern. Check the optimal adjustment value based on the print results of the test pattern. Check the optimal adjustment value based on the print results of the test pattern. Check the optimal adjustment value based on the print results of the test pattern.
The best adjust value is the one that matches the
following conditions:
* The square pattern that has faintest color closest
to gray.
* Vertical lines on both sides are closet to straight.
If the value in column "A" is "+2", the adjustment
value of [A] is [+2]. Also check the appropriate value
for the "B" to "I" lines.
Adjust Adjust the the Head Position Head Position
Adjust Adjust the the Head Position Head Position
1) Press [Adjust].
2) Select the item you want to adjust, and then press the
[OK] key.
3) Enter the adjustment value checked in the test pattern for
the Head Position adjust, and then press the [OK] key.
The display goes back to that of Step 2.
4) Press [End].
The display goes to step 4 in "Printing the test pattern for Head
Position Adjust" on the previous page.
5) Print the test pattern and check the
adjustment results.
Adjustment is complete when the values are all "0".
6) Press the [User Tools/Counter] key to finish.
10
.
Head Position Adjust Head Position Adjust Head Position Adjust
The pattern,
which meets the
conditions
Check the appropriate
pattern for each line.
e.g. "+2" for "A", "+1" for "B",
"-3" for "D", "+2" for E...