Ricoh SGC 1506 Quick Manual page 5

Cleaning Clean ing Print
Clean Clean ing ing
Reference: Reference: See "Nozzle Check Pattern", Troubleshooting. Reference: Reference:
Printing Nozzle Check Pattern Printing Printing Printing Nozzle Check Pattern Nozzle Check Pattern Nozzle Check Pattern
This machine makes prints by spraying inks from nozzles of print-heads and the nozzles are
clogged on rare occasions.
When a specified color is not printed or patchy, the nozzle may be clogged. In this case, check the
nozzles by following steps. When the nozzles are clogged, clean the print-heads.
Before the operation: Before the operation: the operation: the operation:
Before Before
Make sure the Envelope Lever, which is on the right side of the machine,
has been raised. Otherwise, you will be unable to print.
Check that A4 or 8½" × 11"
cannot print the test pattern if paper is not set correctly.
Important Important Important Important
During printing the test pattern, do not conduct any other operations.
1) Press the [User Tools/Counter] key.
2) Select [Maintenance] using [▲] or [▼], and then press the
[OK] key.
3) Select [Nozzle Check Pattern] using [▲] or [▼], and then
press the [OK] key.
4) Press the [Start] key.
Check the print results of the test pattern. Go on to the next page
and check the results.
Print- - - - H H H H eads eads
Print Print eads eads
size paper SEF is set in Tray 1. You
Envelope Lever
Normal
Envelope
5