How To Configure Packet Filter On P-793H V2; How Could I Configure Triple Play On P-793H V2 - ZyXEL Communications P-793H v2 Support Notes

Source Port
Enter the source port number of the traffic.
Enter the protocol number for the traffic. 1 for ICMP, 6 for TCP or 17 for
Protocol ID
UDP
After configuration BWM, you can check current bandwidth of the configured
traffic in Web Configurator, Advanced Setup, Advanced -> Bandwidth
MGMT-> Monitor.

18. How to configure packet filter on P-793H v2?

The P-793H v2 allows you to configure up to twelve filter sets with six rules in
each set, for a total of 72 filter rules in the system. You can apply up to four
filter sets to a particular port to block multiple types of packets. With each
filter set having up to six rules, you can have a maximum of 24 rules active
for a single port.
The packet filter on P-793H v2 is configured in SMT menu 21.1.

19. How could I configure triple play on P-793H v2?

The common triple play scenario is as follows:
VOIP Telephone
Video Client
Clients surfing
Other clients
Triple Play is a port-based policy to forward packets from different LAN port to
different PVCs, thus we could assign different parameters to the PVC (CBR,
UBR, VBR-RT, VBR-nRT) to guarantee different applications.
We could configure triple play on P-793H v2 in SMT menu 24.8 as below:
8021Q groupset [groupid] [vid] [LAN] [index]|[PVC|WLAN|PWR|USB]
[tagged/untagged]
All contents copy right © 2010 Zy XEL Communications Corporation.
0/32
Port1 PVC1
0/34
Port2 PVC2
0/55
Port3 PVC3
1/32
Port4 PVC4
P-793H v2
CPE
P-793H v 2 Support Notes
Port1
Port2
Port3
Port4
IP-DSLAM VL-Switch
Access Network
VOIP Server
IPTV Server
Internet
Others
ISP
79