Attaching The Toe Panel - Jenn-Air JDB9600CWS Installation Instructions Manual

Attaching the Toe Panel

Your dishwasher comes with a two-piece toe panel to allow
height adjustment.
1.
2. Position the mating front toe panel on top of the rear toe
panel allowing the angled edge to rest on the mating edge
of the dishwasher.
3. Drive the two black screws (B) through the holes in the
toe panel to secure. Use the supplied screws to avoid
damaging the dishwasher. See Figure 26.
Figure 26
B
B
K
L
K
11