Replacing Back Upholstery; Replacing Seat Upholstery - Invacare Transport Owner's Operator And Maintenance Manual

Replacing Back Upholstery

NOTE: For this procedure, refer to FIGURE 5.2.
1. Remove the screws and washers that secure the existing back upholstery to the back
canes.
2. Position new back upholstery on back canes.
3. Securely tighten the new back upholstery to the back canes with the screws and
washers.
NOTE: Back upholstery shown is for the Transport and the Lightweight Transport. The Lite
Transport has 10 screws and washers. The Bariatric Transport has 16 screws and washers.

Replacing Seat Upholstery

NOTE: For this procedure, refer to FIGURE 5.3.
1. Remove the screws that secure the existing seat upholstery to the crossbraces.
2. Remove the existing seat upholstery from the crossbraces.
3. Install the new seat upholstery by reversing STEPS 1-2.
NOTE: Seat upholstery shown is for
the Transport, the Lightweight
Transport, and the Lite Transport. The
Bariatric Transport has 14 screws.
Part No.1125095
Washer
Screws
FIGURE 5.2 Replacing Back Upholstery
FIGURE 5.3 Replacing Seat Upholstery
27
Back Upholstery
Washer
Screws
SECTION 5—BACK
Seat Upholstery
Transport Chairs