Trouble Shooting For Web Configurations - Yoda VP306 Quick Installation Manual

11. Trouble Shooting for Web Configurations

11.1. DO NOT HEAR DIAL TONE?
When you pick up the phone and hear a busy tone, it indicates the WAN port is NOT connected. The
LCD will show Ethernet Error! Make sure the ADSL Ethernet cable is connected to the WAN port of
VP306 and Power Reset again.
11.2. CAN NOT ACCESS WEB PAGE?
IE Web Browser is a useful tool to configure VP306.
default IP address
that the PC might have different subnet IP settings from 192.168.123.xxx. In this case, you must
change VP306 IP address to the same subnet as PC and NAT router.
Example: To change VP306 IP address to the same subnet as PC and NAT router
1. Press
the menu to enable DHCP Client mode.
address from NAT DHCP server.
2. Press Menu_4_5
3. Enter from IE web browser
http://192.168.123.1
NAT Router
WAN
LAN
to read IP Addresses for WAN and LAN Ports, for example,
http://192.168.62.51:9999
When you have difficulties in accessing the
of VP306 as in the following figure, the most possibility is
ADSL Modem
For VP306P
PSTN
IP: 192.168.123.1
VP306 will reboot, and LED will start flasing to get an IP
to login VP306 web page for configurations.
59
INTERNET
PSTN
192.168.62.51.