Related Manuals for Yoda VP200
Summary of Contents for Yoda VP200
- Page 1 IP Phone user Guide...
-
Page 2: Front Panel
Appearance 1. Front Panel fig 1.1 Front Panel Network Light 2. Logon Light 3. Service IP Local IP 5.Local num 6. Vol/+ Vol/- Number 9. Phone Book Back Space 11. Redial 12. Spk 13. Missed 14.Answered 15. Dialed 16 Flash 17. -
Page 3: Performance And Features
fig 1.2 Backside view Performance and Features Ø Features Features Ø Hardware Hardware Main chip PA1688 50MHz Data Memory 2MB SDRAM Program Memory 2 MB Flash memory Ethernet Port 2X 10/100M Connectors AC/DC adapter Input AC100--- 230V Output 9V DC, 1A Ø... - Page 4 CNG (Comfort noise generation) Dynamic voice jitter buffer G.167/165 compliant 16ms echo cancellation Tone generation and Local DTMF re-generation according with ITU-T Support the Inband audio; RFC2833; SIP INFO etc DTMF transmission method E.164 dial plan and customized dial rules 100 entries for speed dial 80 entries each for missed calls, answered calls and dialed calls Adjustable volume for both handset and speaker...
- Page 5 VAD/CNG save bandwidth DHCP Dynamic Host Configuration Protocol PPPoE PPP Protocol over Ethernet DNS Domain Name Server Telnet Internet's remote login protocol FTP File Transfer protocol TFTP File Transfer protocol (optional) HTTP Hyper Text Transfer protocol Ø Operating requirements: Operating requirements: Operation temperature: 0 to 50 C (32 to 122 F) Storage temperature: -30 to 65 C ( -22 to 149 F) Humidity: 10 to 90% no dew...
-
Page 6: Phone Keypad Set
Phone keypad set When IP phone has been installed properly, you can enter the menu through the keyboard and LCD, and then set each parameter accordingly. Function Keys Introduction Keys Function Service IP With handset hung, press this key to get the GK IP address Local IP With handset hung, press this key to get phone IP address Local Number... - Page 7 not set as0[disable], default password is 1234; when debug is set as 0[disable], please use super password 19750407), and then press # , till thes Password is displayed. Then enter the password again and press to let the phone enter password: setting mode.
- Page 8 is selected, press key to confirm, IP phone will reboot and be used the current settings. Save the settings Save the settings When all parameters have modified, press Redial key to return to the main menu, and press VOL+ VOL- to page the menu up or page the menu down;...
- Page 9 Ø Set the main menu Set the main menu Main Menu Structure Main Menu Structure Fig 2.1 Main Menu structure Illustration Ø Set the network submenu Set the network submenu Network Submenu Structure Network Submenu Structure Fig 2.2 Network submenu structure Illustration Ø...
- Page 10 Fig 2.3 Audio submenu structure Illustration Ø Set the dial plan submenu Set the dial plan submenu Dial plan submenu Structure Dial plan submenu Structure Fig 2.4 Dial plan submenu structure Illustration Ø Set the protocol menu Set the protocol menu Protocol Submenu Structure Protocol Submenu Structure - 9 -...
- Page 11 Fig 2.5 Protocol submenu structure Illustration Ø Set the other menu Set the other menu Other Submenu Structure Other Submenu Structure Fig 2.6 other submenu structure Illustration Ø Set the Advanced menu Set the Advanced menu Advanced Submenu Structure Advanced Submenu Structure Fig 2.7 advanced submenu structure Illustration - 10 -...
- Page 12 IP phone digital-character key map: Appendix Ta Appendix Table Keys Keys Press Once Press Once Press Twice Press Twice Press Thrice Press Thrice Press quartic Press quartic Press quintic Press quintic space \ /& Case change Ø Configured by Configured by WEB Double click icon to open the IE browser.
- Page 13 Fig 3.1 Http Setting Default password 1234 is ordinary password and super password is 19750407. With Debug set 0[disable], please input super password; while Debug is 0[disable], please input ordinary password. Then click button. The following configured page wills popup. Ø...
- Page 14 LAN or router automatically assigns all the required network parameters to any device connected to it when the device log on. VP200 IP phone is shipped from the factory with DHCP on. So, if your LAN or router is configured to use DHCP addressing, the IP phone s LAN parameters will automatically be configured as soon as it is connected to the LAN or router and powered up.
- Page 15 IP address of backup DNS server here. mac: MAC address is the physical address supplied by the Ethernet mac: NIC. VP200 phone is shipped from the factory with a unique algorism MAC address printed on the back of the base. - 14 -...
- Page 16 Ø Audio Audio settings: settings: Fig 3.3 Audio Setting codec1: Set the priority 1 of the audio compression algorithm. The codec1: options are g729 11a and gsm g729 g g 7 7 231 g711u g711u g g 7 7 11a gsm.
- Page 17 agc: Enable/disable AGC. agc: aec: Enable/disable VEC. aec: audio frame: Set audio frames in RTP package. Minimum is 1 and maximum audio frame: is 8. g.723.1 high rate: enable/disable g.723.1 high rate. G.723.1 high g.723.1 high rate: rate is 6.3kbps, low rate is 5.3kbps. d : Set the payload type of RTP package whne ILBC codec ilbc payload : ilbc payloa...
- Page 18 Advanced: : Set ring u sed the individualized t one provided by system Advanced (need system support). speaker out: Set the volume of handfree output. speaker out: speaker in: Set the volume of handfree input. speaker in: Ø Dial Plan settings: Dial Plan settings: Fig 3.4 Dial Plan Setting use dialplan: Set whether use dial plan or use dial number by...
- Page 19 field. dial number: With dialnum dialnum selected in use dialplan use dialplan drop down list, dial number: please enter the dial prefix into this field according to requirement of log in server. ddd code: With enable ddd code: enable or dialnum dialnum selected in use dialplan use dialplan drop down list, set area code according to E.164 dial rule.
- Page 20 enable: enable call innerline by selecting this item. enable: innerlineprefix: With enable enable selected in innerline innerline dropdown list, innerlineprefix: please fill the prefix number pick up to inner line, such as 0. C C all waiting: all waiting: Enable/disable call waiting by checking/unchecking the box.
- Page 21 Ø SIP Protocol S SIP Protocol S etting etting Fig 3.5 SIP Protocol Setting use service: Enable/disable service by checking/clearing this box. use service: To make calls through SIP Proxy Server, please check this box; otherwise, phone can only make IP-to IP calls. register ttl : IP phone will send a keep-alive registration message register ttl : to SIP proxy server every...
- Page 22 § uptech: : Use Uptech s system uptech § keimen: : Use Keimen s system keimen § mediaring: : Use Mediaring s SIP system mediaring § italkbb: Use ItalkBB s SIP system italkbb: § stanaphone: Use Stanaphone s SIP system stanaphone: §...
- Page 23 domain/realm: : Set the domain name of the SIP proxy server . domain/realm nat traversal: When the IP phone with private IP address need nat traversal: communicate with other IP phones i n a different LAN or on Internet, please select an item from dropdown list. disable: Select this item when the sip proxy server and IP phone disable: in the same LAN, or the sip proxy system supports the IP phone...
- Page 24 When is set to , please put the URI of the nat traversal nat traversal stun stun stun server into , in the format as domain name/IP nat addr nat addr address : service port . The default service port for stun is 3478. nat ttl: When IP phone sit behind a NAT device, it will send packets nat ttl: to server every...
- Page 25 this value is 0, the higher priority the packet is 224. outbound proxy : Enable/disable O utbound proxy by checking/clearing outbound proxy : this box. If the system has an Outbound Proxy please set the URI of the Outbound proxy into sip proxy sip proxy and set the domain name of...
- Page 26 by selecting this item. remote debug: Save the debug information in SDRAM of IP phone by remote debug: selecting this item. no check: Disable checking firmware tags when upgrading. This is no check: not suggested, because it will increase the risk of upgrading the wrong firmware into the phone.
- Page 27 FTP server specify by upgradeaddr upgradeaddr item . phonenumber: VP200 phone will find matching firmware binary file phonenumber and configuration file of the phone only at the FTP server specify by up gradeaddr item .
- Page 28 Fig 3.7 Setting Page using ordinary pin with Debug set as 0 [disable] Save Settings : Click this button to save the configuration and the Save Settings : phone will reboot. Once the phone reboots successfully, the new configuration is effective. Note After entering set page, if save settings button is not clicked within 10 minutes, then when you click it again, the index page asking for pin will pop up again.
- Page 29 in Name field following 001, and then input 5989426454 into Phone number field. Then Jack s number 5989426454 is saved i n phone book. Then please click Save/Back Save/Back button. In normal state, you can use speed dial to call numbers saved in phone book. Fig 3.8 Phone Book Illustration Upgrade Firmware: Click this button to update the program, the Upgrade Firmware:...
- Page 30 - 29 -...