Table of Contents
Advertisement
5. The IE Web browser will show the following System Information page.
6. You need to set up the following web configurations: Phone, Network WAN/LAN Settings, SIP
Settings. Remember to submit, save and reboot for new configurations.
7. For WAN settings
DHCP:
This is for Dynamic IP address and is commonly selected for WAN IP address when NAT is selected.
Once selected, the IP address, Subnet mask, and Gateway IP will be automatically assigned.
Remember to click Submit button to get effective.
PPPoE:
This is for ADSL IP address when PPPoE protocol is used. Once selected, the user needs to enter
the PPPoE username and password, and the WAN port will get an IP automatically.
5
Advertisement
Table of Contents
