Table of Contents
Advertisement
SIP Settings
Service Domain Settings
8.55. You can setup the Service Domain, Port Settngs, Codec Settings, RTP Setting, RPort Setting and
Other Settings for SIP Proxy Server registrations in this page.
8.56. You may register up to three SIP Servers for three Realms in the VP306. You can receive the
incoming calls from all the three SIP Servers.
SIP server first, and then call the associated registration phone number.
Example 1: To select SIP Server 1 (default), please pickup the phone, press 1_*, then hangup.
Example 2: To select SIP Server 2 (or 3), you may press
8.57. Click "Active" ON to enable the Service Domain, then enter the following items:
8.58. Display Name:
8.59. User Name:
8.60. Register Name:
8.61. Register Password: enter the Register Password given by your ITSP.
8.62. Domain Server:
8.63. Proxy Server:
8.64. Outbound Proxy:
8.65. When it shows "Registered" in the Register Status, it indicates a successful registration to the
ITSP, and the "REG" LED will turn ON. The VP306 is then ready for VoIP call.
8.66. After you finished the setting, please click the "Submit" button.
enter the name you want to display.
enter the User Name given by your ITSP.
enter the Register Name given by your ITSP.
enter the Domain Server given by your ITSP.
enter the Proxy Server given by your ITSP.
enter the Outbound Proxy of ITSP. If not provided, you may skip this.
For outgoing calls, you may select the registration
2_*_Speaker
35
(or 3_*_speaker).
Advertisement
Table of Contents
