Table of Contents
Advertisement
Call Waiting
8.25. When call waiting is set ON, you will hear an interrupt "dodo" tone over the phone to remind
that there is an incoming call from the third party.
Soft Key
8.26. You can configure the pickup and VMS key setting to co-work with IP PBX in this page.
Pick Up & Voice Mail
8.27. VP306 may pick up the incoming call for another VP306 when registered in the same IP PBX.
When you hear other VP306 is ringing, you may pick up you phone and press Pick Up function
key to answer for that VP306. You may press the Speaker Phone key then Pick Up function key
as well.
8.28. When registered in IP PBX with incoming voice message, the LED
hear the message you may press the Speaker Phone key then VMS function key. You may also
pick up the phone and press VMS function key.
25
VMS
will start flashing.
To
Advertisement
Table of Contents
