Vent Blower
The three-speed vent blower can be directed
upward, to the rear, or re-circulated into kitchen
after installing the charcoal fi lter kit (part
numberWB02X10943).
The vent blower is located on the top rear of the
microwave oven. See installation instructions for
the proper method of directing the vent fan prior to
installing unit.
To remove the vent blower:
1.
Remove the oven. (See
2.
Remove 3 Phillips-head screws on the top of
the oven that hold the exhaust adapter in place,
then slide the exhaust adapter to the rear and
remove.
3. Remove the Phillips-head screw on the back of
the oven holding the vent blower in place.
View From Rear
.)
Oven Removal
– 15 –
4. Lift out the vent blower and place it on top of the
oven. Disconnect the electrical connector to the
vent blower.
Electrical Connector
View From Rear
Disconnect
View From Rear
Interior Light
The interior light bulb is 12 VAC, 20 watt (part
number WB36X10176).
To remove the interior light:
1.
Remove 2 Phillips-head screws from the top of
the oven that attach the grill assembly to the
oven and remove the grill.
2. Remove the Phillips-head screw that attaches
the interior light assembly to the top of the
microwave oven.
Grill Assembly
(Continued next page)