Control Panel Assembly; Smart Board - GE Spacemaker JVM1665 User Manual

3. Lift the light assembly up to expose the interior
light bulb.
4. Pull gently to remove the bulb.

Control Panel Assembly

The control panel assembly consists of a smart
board, metal frame, touch pad/escutcheon, and a
knob. (4 parts)
To remove the control panel assembly:
1. Disconnect power to the microwave oven.
2. Remove 2 Phillips-head screws from the top of
the microwave that attach the grill assembly to
the oven and remove the vent.
3. Remove the Phillips-head screw that attaches
the control panel to the oven and pull the
control panel up and out to remove.
4. Mark and disconnect all the wiring harnesses to
the smart board.
Bulb
Grill Assembly
– 16 –

Smart Board

To remove the smart board:
1. Remove the control panel assembly. (See
.)
Panel Assembly
2. Pull the knob straight out and off of the control
board.
Knob
3. Disconnect the touch panel ribbon from the
smart board.
4. Remove 8 Phillips-head screws that attach the
smart board to the control board frame and lift
the smart board off the frame.
Control
Disconnect