Installing The Motor Housing - Hunter Type A Installation And Operation Manual
Hide thumbs
Also See for Type A:
- Owner's manual and installation manual (15 pages) ,
- Installation and operation manual (15 pages)
Advertisement
4 • Installing the Motor Housing
Housing
Assembly Screw
Housing
Steps 4-1 – 4-3
Housing
Assembly Screw
42815-01 • 10/02/07 • Hunter Fan Company
4-1. Place the fan housing over the motor.
4-2. Align the holes in the fan housing with the holes
in the ceiling plate.
4-3. Partially install each housing assembly screw
into the holes in the fan housing and into the
ceiling plate until all holes are aligned. Securely
tighten all screws.
7
Advertisement
