Page 1
For Your Records and Warranty Assistance Model Name: _____________________ Catalog/Model No.: ________________ Serial No.: ________________________ Date Purchased: ___________________ Where Purchased: _________________ TYPE A Model For reference also attach your receipt or a copy of your receipt to the manual. 42815-01 • 10/02/07...
Page 3
Mounting and Optional Accessories Understanding Mounting Support Brace Hunter’s patented mounting system provides you maximum ease in installing your fan. This fan was designed to be mounted only on flat ceilings and can be used on ceilings less than 8 feet high. Considering Optional Accessories Low Profile Ceiling Mounting Outlet Box Consider using Hunter’s optional accessories, including a wall-mounted...
To install a ceiling fan, be sure you can do the following: • Locate the ceiling joist or other suitable support in ceiling. • Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: • Electric drill with 9/64” bit • Standard screwdriver (magnetic tip recommended)
2-4. Place a flat washer on each of the two 3” wood screws and pass the screws through the slotted holes in the ceiling plate into the pilot holes you drilled. Ceiling Plate Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Steps 2-4 – 2-6 Flat Washer 3” Wood Screw 42815-01 • 10/02/07 • Hunter Fan Company...
3-7. Turn the splices upward and push them carefully back through the ceiling plate into the outlet box. 3-8. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the Step 3-6 (Single) outlet box. 42815-01 • 10/02/07 • Hunter Fan Company...
Housing 4-3. Partially install each housing assembly screw Assembly Screw into the holes in the fan housing and into the ceiling plate until all holes are aligned. Securely tighten all screws. Housing Steps 4-1 – 4-3 Housing Assembly Screw 42815-01 • 10/02/07 • Hunter Fan Company...
6-4. Install two 60 Watt max (Type B10) candelabra base bulbs into the sockets. 6-5. Align the arrow on the glass with the arrow in the mid-body housing. Rotate the glass clockwise to engage the tabs. Step 6-4 Arrows Step 6-3 Light Kit Screw Light Kit Screw Step 6-5 42815-01 • 10/02/07 • Hunter Fan Company...
In cold weather, use upward air flow pattern Reversing Switch To Change Airflow Direction Turn the fan off and let it come to a complete stop. Let the glass cool then remove the glass from the light fixture. Wait a minimum of 90 seconds before sliding the reversing switch on the fan to the opposite position. Use a tool (screwdriver) to reverse switch. Replace the glass and restart the fan. Reversing Switch 42815-01 • 10/02/07 • Hunter Fan Company...
2. Tighten all blade and/or blade iron screws. If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 42815-01 • 10/02/07 • Hunter Fan Company...